Tuesday, December 21, 2010

Some Plans





This is the latest version of the interior showing the beds, pull-out table, and bench seats. There's also a to-do list that has nothing to do with this project. This basic plan seems to be standard. Following Paleotool's design, there will be a bunk-bed system at the rear. The seats will double as storage boxes, and the backs will be reclined slightly. It will be a challenge to make a small space (32 ft2) feel comfortable and spacious.

Monday, December 20, 2010

Step 2











I cut the frame in half (on the horizontal plane) and welded inserts to raise the trailer's sides up from 14" to 2 feet. I used an older Sears 110v mig welder with gas shielding. It does an OK job. Not pretty but it passed the sledge hammer test. I then added the shocks which are mounted to the frame and axle U-clamps by means of 1/4 inch thick mild steel angle iron brackets.  I used light duty RV shocks from Napa Auto-parts, and I've got to say that the folks there were very helpful (unlike the folks at Schmuck's, or something like that, who thought I was nuts).

I've been working on the design more and getting the family in on "fittings."  We used pieces of scrap wood to make sure we will all fit comfortably inside, that the beds will be big enough, and that the seats and table the right height.

Sunday, December 12, 2010

Step 1

Stripped out the sides and deck of the old trailer. The frame is in good shape. The trailer is 8'X5' and rated for a 2500 lb payload. I don't really have a plan for this thing yet, just a bunch of ideas in my head, and a good friend who keeps sending me more great ideas. Actually, this project is all his fault! You can see his work at his blog (here).